Plus 1, Quad kit Fenders , Polaris Slingshot

PLUS 1 QUAD FENDERS, by All Things Slingshot 

Rugged , fiberglass fenders to fit Camaro based Plus 1 4 wheel  Kits, (or similar) .  These Plus 1 Quad fenders are adjustable on width , right to left, to allow for centering on all sizes of tire and rim combinations. The fenders are a fixed height and shown here on a very tall 315 x 35 x 20 inch tire, with a Diameter of 28.7 inches. (although camera angles can be deceptive there is only a 1/2inch  clearance between these tires and outside fender lip.)

Using black steel tubular brackets these fenders mount to the sides of the vertical upright’s post using the two steel offset bracket bolts for the upper control arm allowing a tight tire fit outboard of the shocks.

The  324 Quad kilts used the same aluminum uprights allowing for attachment of these All Things Slingshot Plus 1 fenders, except some early model 324’s which used a  ‘U” shaped steel bracket to mount upper control arm to face of aluminum upright.  Two bolt side mounted, steel off setting, upper control arm brackets required .

OPTIONAL LED TAILLIGHTS –At minimum, red reflectors are required on outside rear corners of all motor vehicles  Polaris slingshots had these , but when widening your rear end, why not go one step further by adding outside corner  taillights.BE SAFE, BE SEEN ! 

• Water Resistant sealed Led Taillights
• Flowing, signal light function
• Brake Light function
• Wiring Kit – includes heat shrinkable crimped splices, wiring , loom, and Tee Taps  required to  tie  into Polaris wiring at taillights, (not plug and play), schematic included
• Relay and schematic to use the negative input Polaris brake light wire to trigger positive input signal required for aftermarket taillights with brake light functions

This is a Made To Order Item and requires minimum two weeks to ship

During these trying times of Covid 19, supply chains worldwide, are being disrupted, please allow possibly, an additional two or three weeks prior to shipping

.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }