Plus 1, Quad kit Fenders , by ATSS (2015- current)

PLUS 1 QUAD FENDERS, by ATSS for the 4 wheel Polaris Slingshot

Rugged , fiberglass fenders to fit Camaro based Plus 1 Quad  Kits, (or similar) .  These Plus 1 Quad fenders are adjustable on width , right to left, to allow for centering on all sizes of tire and rim combinations. The fenders are a fixed height and shown here on a very tall 315 x 35 x 20 inch tire, with a Diameter of 28.7 inches. (although camera angles can be deceptive there is only a 1/2inch  clearance between these tires and outside fender lip.)

Using black steel tubular brackets these fenders mount to the front and back  of the vertical upright’s post using the two steel offset bracket bolts for the upper control arm allowing a tight tire fit outboard of the shocks.

The  324 Quad kilts used the same aluminum uprights allowing for attachment of these All Things Slingshot Plus 1 fenders, except some early model 324’s which used a  ‘U” shaped steel bracket to mount upper control arm to the  face of the aluminum upright. If you have the early model  U shaped bracket these new fender brackets  are not compatible with those .

OPTIONAL LED TAILLIGHTS –At minimum, red reflectors are required on outside rear corners of all motor vehicles  Polaris slingshots had these , but when widening your rear end, why not go one step further by adding outside corner  taillights.BE SAFE, BE SEEN ! 

• Water Resistant sealed Led Taillights
• Flowing, signal light function
• Brake Light function
• Wiring Kit – includes heat shrinkable crimped splices, wiring , loom, and Tee Taps  required to  tie  into Polaris wiring at taillights, (not plug and play), schematic included
• Relay and schematic to use the negative input Polaris brake light wire to trigger positive input signal required for aftermarket taillights with brake light functions

Quad Conversion Kits Sold Here, (Click) 

This is a custom Made To Order Item and requires minimum two weeks to ship

During these trying times of Covid 19, supply chains worldwide, are being disrupted, please allow possibly, an additional two or three weeks prior to shipping